|
Description
|
View
|
|
| Update: |
GTCL-01 Uni/LG
3G/SE GTCL-001 Clips can be
updated... i.e. : if you bought LG 3G Clip, now you can upgrade your clip into GTCL-01 Uni Clip or SE GTCL-001 Clip if you bought GTCL-01 Uni Clip, now you can upgrade your clip to LG 3G Clip or SE GTCL-001 Clip You can generate update which you want to use, but can use only one of them. Why? Because clip don not have enough memory to able use all updates same time. All generated updates will be saved to your HDD and you can use it anytime.
|
|
| Supports: |
Direct Unlock: All Siemens (New) C45, S45, ME45, A50, M50, MT50, A55, A56, C55, C56, M55, S55, SL55, SL5C, 2128, 1168, C60, MC60 Code Calculation (via Computer): Panasonic GD-55 Siemens ST-55 All DCT4 via CODE (including TYPE 7, new models and new versions, the only calculator supporting this at present) AEG via CODE MAXON via CODE VITEL via CODE DCT3 via CODE |
|
| Features: |
No need to open the phone. No test point required. Supported flash IC: All known. Repair wrong software. Repair damaged imei (Read imei from OTP and crypt again in eprom). Unlock time: 2-3 seconds Every customer receives a special upgrade cable, and if Siemens will release a new phones - you don't need to worry that your clip is a piece of hardware, you just upgrade it and that's all! You are in business again! 100% return of your investments and future support. |
|
| Set includes: | • Siemens clip dongle |
|
| Clip Instructions: |
Click HERE view a video of the clip in action - Power your clip on. - Connect the appropriate cable to your clip. - Connect the phone to the cable - Press the "Reset" button - Press the on button on your phone once. - The phone should display "service mode" - Press the on button on your phone once again - Your phone should power on and say insert SIM. - Disconnect the cable and check the phone with a foreign SIM to see if it is unlocked. |
|
| Update Instructions: |
To update your clip you will need to download the updater software.
This can be found HERE - Connect your update cable to your pc. - Turn off your clip, and then connect the clip to the update cable - Turn your update cable on. The green LED should be static. (not flashing) - Open the updater software. - Select the file you want to upload. ("Select File") - Press the update ("Update") button. - The software will then display some information such as the flasher version, the clip serial number. - During the flashing process, the green and red leds will flash at different intervals. - Once the flashing process is complete the last command on the software should be "Restarting Clip... OK" - The green led should now be flashing. - You have now successfully updated your clip. |
|
| Update Files: |
V2 Update for Clip SN: 1 to
500 Support for sl55 V2 Update for clip SN: 501 to 1000 Support for sl55 V3 update for clip SN: ALL Support for M55 and MT50 V4 Update for clip SN: ALL Support for C55 1720 flash and M55 new hardware version V5 Update for clip SN: ALL Support for S46 V6 Update for clip SN: ALL All known bugs fixed. Support for V07 M55 V7 Update for clip SN: ALL Support for Siemens ST55 and PanasonicGD55 via PC.
V8 Update for clip SN: ALL
V10 Update for clip SN:
ALL |
|
| DOWNLOAD PRICELIST | ||
